Welcome to our website
  • head_banner_01

Hot selling europe market 2P 63A/4P 63A AFDD CB approval AFDD untis arc fault circuit breaker

Short Description:

Product Detail

Product Tags

Categories AFDD
Model AFDD
Pole No 2p
Rated voltage AC 230
Rated current(A) 6A,10A,16A, 20A,25A & 32A.63A
Tripping curve B,C
Rated frequency 50/60Hz
Energy limiting class 3
Rated impulse withstand voltage 6.2kV
Fastening torque 2 0Nm
High short-circuit breaking capacity (Icn) 6kA
Electro-mechanical endurance 10000
Terms of Payment L/C, Western Union, MoneyGram, T/T, Paypal
Technical Data
arc fault circuit breaker

lPoleNo.: 1P+N

lRated voltage: AC 230

lRated current (A):6A,10A,16A, 20A,25A & 32A

lTripping curve: B, C,

lHigh short-circuit breaking capacity (lcn):6kA

lRated frequency: 50/60Hz

lEnergy limiting class: 3

lRated impulse withstand voltage: 6.2kV

lElectromechanical endurance: 10000

lContact position indication

lFastening torque: 2.0Nm

lConnection terminal:Screw terminalPillar terminal with clamp

lConnection capacity: Rigid conductor up to 25mm2

lFastening torque: 2.0Nm

lInstallation:On symmetrical DIN rail 35.5 mmPanel mounting

lTerminal Connection Height: 21mm

General Information
arc fault circuit breaker

The AFM range AFDD consists of a MCB (Miniature Circuit Breaker) and a Arc fault detection module in a 1 Pole +N, 2 module DIN rail mounted unit. They combine short circuit, overload and arc fault protection and will switch off in the event of these faults being detected.

The Arc detection unit will recognise serial, parallel and ground arc faults in both radial and ring circuits. (Note serial faults in a ring circuit does not always lead to an arc fault due to power flowing to either side of the fault at the same potential voltage.

These units must be switched off when conducting insulation testing to avoid damage to the AFDD

The AFDD should be tested every month by pushing the Test button.

Recommended terminal screw torque 2Nm

Overall & Installation Dimensions
Arc fault circuit breaker drawings

  • Previous:
  • Next:

  • Write your message here and send it to us