Buy Discount Magnetic Door Contactor Factory – Contactors without manually-operated the breadth of the SCT contactor range satisfies most application cases. – Sofielec Electrical

AC contactor function introduction

The AC contactor is an intermediate control element, and its advantage is that it can frequently turn on and off the line, and control a large current with a small current. Working with the thermal relay can also play a certain overload protection role for the load equipment. Because it works on and off by electromagnetic field suction, it is more efficient and more flexible than manual opening and closing circuits. It can open and close multiple load lines at the same time. It also has a self-locking function. After the suction is closed, it can enter the self-locking state and continue to work. AC contactors are widely used as power breaking and control circuits.The AC contactor uses the main contact to open and close the circuit, and uses the auxiliary contact to execute the control command. The main contacts generally only have normally open contacts, while the auxiliary contacts often have two pairs of contacts with normally open and normally closed functions. Small contactors are also often used as intermediate relays in conjunction with the main circuit. The contacts of the AC contactor are made of silver-tungsten alloy, which has good electrical conductivity and high temperature ablation resistance. The action power of the AC contactor comes from the AC electromagnet. The electromagnet is composed of two “mountain” shaped young silicon steel sheets, one of which is fixed, and a coil is placed on it. There are various working voltages to choose from. In order to stabilize the magnetic force, a short-circuit ring is added to the suction surface of the iron core. After the AC contactor loses power, it relies on the spring to return.

Technical Data

Singel phase AC Contactor (Contactor for short) is mainly designed for 50Hz or 60Hz Circuits with 230V rated operating voltage. In AC-7a usage, rated operating voltage up to 230V, rated operating current up to 100A, it functions as long distance breaking and circuit controlling. This product is mainly applied to household appliances or low inductance loading and home electromotor loading control used for the similar purpose.

Normal Working and Installation Conditions 

1.Ambient temperature: -5℃ to +40℃, the average temperature no more than+35℃ in 24 hours.
2. Altitude: no more than 2,000m.
3.Atmospheric condition: the relative humidity of the installation place should be no more than 50% when the manximum temperature is +40℃; if under a lower temperature, a higher relative humidity is allowed. The monthly average minimun temperature in the wettest month should not exceed +25℃ and the monthly average maximum relative humidity of this month no more than 90%.Besides,the dew on the surface of products causes by temperature change should be taken into consideration.
4. Class of pollution : class 2.
5. Installation condition: class II
6. Installation mode: use the installation orbit of “Top Cap” section TH35- 7.5 mould.

Structure

This kind of contactor belongs to the terminal product which holding the following characteristics: normalization of installation, modularization of dimension, artistic appearance and safe for use, In addition, it adopts the equipment of direct-acting configuration.

Dimension

factory

certification