China wholesale Contactor Relay Exporter – Built-in microprocessor, current measurement accuracy ≤2%. No-load start, protection of any phase failure or overload. NO contact protection – Sofielec Electrical
China wholesale Contactor Relay Exporter – Built-in microprocessor, current measurement accuracy ≤2%. No-load start, protection of any phase failure or overload. NO contact protection – Sofielec Electrical Detail:
Instructions for use of relays
Rated working voltage: refers to the voltage required by the coil when the relay works normally, that is, the control voltage of the control circuit. Depending on the model of the relay, it can be either AC voltage or DC voltage.
DC resistance: refers to the DC resistance of the coil in the relay, which can be measured by a multimeter.
Pick-up current: refers to the minimum current that the relay can generate the pick-up action. In normal use, the given current must be slightly larger than the pull-in current, so that the relay can work stably. For the working voltage applied to the coil, generally do not exceed 1.5 times the rated working voltage, otherwise a large current will be generated and the coil will be burned.
Release current: It refers to the maximum current that the relay produces to release the action. When the current in the pull-in state of the relay is reduced to a certain extent, the relay will return to the unenergized release state. The current at this time is much smaller than the pull-in current.
Contact switching voltage and current: refers to the voltage and current that the relay is allowed to load. It determines the magnitude of the voltage and current that the relay can control. It cannot exceed this value when using it, otherwise it is easy to damage the contacts of the relay.
Application
Used in switchgear, air conditioning units, elevator machine room, pumps, fans and other motor control applications. With phase loss, overload protection.
Features
Built-in microprocessor, current measurement accuracy≤ 2%. Konb setting, LED indicator shows working status. With phase failure, overload, unbalance, stall protection, four optional trip classes. No-load start, protection of any phase loss or overload. NO contact protection.
Technical Data
| Rated control supply voltage | AC38 0V, >AC2 20V 50Hz/60Hz |
| Curr ent measurement accuracy | 52% |
| Setting accuracy | 55% |
| Setti ng mode | Knob setting |
| Num ber of poles | 3P |
| Rated insulation voltage | AC690V |
| Class of pollution | 3 |
| IP Class | IP20 |
| Contact capacity | Ith:SA; AC-15 : Ue/Ie 380V/0.95A 240V/1.5A |
| Use category | AC-15 |
| Elect rical life | 10′ |
| Mechanical life | 106 |
| Altitude | 52000m |
| Allowable relative humility | 550%/40°(condensation) |
| Power consumption | ≤1.5VA |
| Installation | /Screw or DIN rail mounting |
Wiring Diagram
Dimensions
factory
certification
Product detail pictures:
Related Product Guide:
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of China wholesale Contactor Relay Exporter – Built-in microprocessor, current measurement accuracy ≤2%. No-load start, protection of any phase failure or overload. NO contact protection – Sofielec Electrical , The product will supply to all over the world, such as: Honduras, France, Serbia, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, be sure to click the button to acquire additional nformation.
By Fiona from Netherlands - 2017.07.28 15:46
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Stephanie from Armenia - 2018.09.16 11:31
