China wholesale Contactor Relay Factory – As protection of over-voltage, under voltage, phase failure, phase sequence and phase unbalance. When the power supply is abnormal, turn off power supply to protect the equipment – Sofielec Electrical
China wholesale Contactor Relay Factory – As protection of over-voltage, under voltage, phase failure, phase sequence and phase unbalance. When the power supply is abnormal, turn off power supply to protect the equipment – Sofielec Electrical Detail:
Relay FAQ
The relay is not conducting
1) When the relay should be turned on, measure the input voltage. If the voltage is lower than the required operating voltage, it indicates that there is a problem with the line in front of the SSR input; if the input voltage is higher than the required operating voltage, check the polarity of the power supply and if necessary be corrected.
2) Measure the input current of the SSR. If there is no current, it means that the SSR is open, and the relay is faulty; if there is current, but it is lower than the action value of the relay, there is a problem with the line in front of the SSR and must be corrected.
3) Check the input part of the SSR, measure the voltage across the output of the SSR, if the voltage is lower than 1V, it indicates that the line or load other than the relay is open and should be repaired; if there is a line voltage, it may be the load short circuit, causing the current to be too large. Relay failed.
Function
| Categories | Voltage Control Relay |
| Rated control supply voltage | AC220V. AC380V DC12V DC24V~240V 50/60Hz |
| Rated power consumption | AC:≤1.5VA DC:≤1W |
| Delay range | 0.1s~100h |
| Setting accuracy | ≤5% |
| Repeat acuracy | ≤0.2% |
| Repeat power-on interval | ≥200ms |
| Atitude | ≤2000m |
| Contact configuration capacity(A) | 1C/O,2C/O l6A, 1C/O+1 intant c/O, 3C/O 8A |
| IP Class | IP 20 |
| Contact capacity | 1 C/O, 2 C/O, 1C/O+1 instant C/O, 3C/O |
Applications
Used in air conditioning units, elevator machine room, pumps, fans and other motor control applications, as protection of over-voltage, under voltage, phase failure, phase sequence and phase unbalance. When the power supply is abnormal, turn off power supply to protect the equipment.
Features
Built-in microprocessors, true RMS voltage measurement, voltage measurement accuracy 5 1%. Measuring frequency 45Hz~65Hz, button setting, LCD display voltage and fault information, protection can be turned on or off. Check phase voltage value by button, with N-phase phase failureprotection. DIN rail mounting.
Technical Data
| Rated supply voltage | DC12V, AC/DC 24V~240V 50/60Hz |
| Rated power consumption | ≤1W |
| Delay range | 0.1s ~ 100h multi-range adjustment |
| Setting accuracy | ≤5% |
| Repeat accuracy | ≤0.2% |
| Repeat power-on interval | ≥200ms |
| Electrical Life | 105 |
| Mechanical life | 106 |
| Altitude | ≤2000m |
| Contact configuration capacity(A) | 1C/O:16A ,2C/O:16A,3C/O:8A,2C/0+1 instant C/O:8A+ 16A |
| IP Class | IP 20 |
| Class of pllution | Ⅱ |
| Use category | AC-15 |
| Contact capacity | Ue/le AC240V/1.5A |
| Contact capacity | 1C/0 ,2C/O,3C/O,2C/0+1 instant C/O |
| DIN rail Standard | width 35mm(IEC/EN60715) |
| Allowable relative humidity | ≤50%(40°C) (No condensation ) |
| Short circuit protector type | RT36-00 5A |
Wiring Diagram
Dimension
factory
certification
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. Top quality is our life. Purchaser need is our God for China wholesale Contactor Relay Factory – As protection of over-voltage, under voltage, phase failure, phase sequence and phase unbalance. When the power supply is abnormal, turn off power supply to protect the equipment – Sofielec Electrical , The product will supply to all over the world, such as: Palestine, Jersey, Jamaica, Based on our guiding principle of quality is the key to development, we continually strive to exceed our customers' expectations. As such, we sincerely invite all interested companies to contact us for future cooperation, We welcome old and new customers to hold hands together for exploring and developing; For more information, please feel free to contact us. Thanks. Advanced equipment, strict quality control, customer-orientation service, initiative summary and improvement of defects and extensive industry experience enable us to guarantee more customer satisfaction and reputation which, in return, brings us more orders and benefits. If you are interested in any of our products, please feel free to contact us. Inquiry or visit to our company are warmly welcome. We sincerely hope to start a win-win and friendly partnership with you. You can see more details in our website.
By Lena from kazan - 2017.06.25 12:48
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Gustave from Morocco - 2018.05.13 17:00
