The circuit breaker is also called a circuit breaker, and its interior is mainly composed of main contacts, reaction springs, hooks, levers, electromagnetic tripping and undervoltage tripping devices. It can protect the circuit from overcurrent, overheating, and undervoltage.
Overcurrent protection
When the load is severely short-circuited and the circuit current is very large, the electromagnetic trip coil generates a strong magnetic field and attracts the armature through the iron core. The armature acts to drive the lever to move up. The two hooks are tripped, relying on the action of the reaction spring. , The dynamic and static contacts are disconnected, thereby cutting off the circuit.
Provides protection against earth fault/leakage current and function of isolation
High short-circuit current withstand capacity
Applicable to terminal and pin/fork type busbar connection
Contact position indication
Equipped with finger protected connection terminals
Fire resistant plastic parts endures abnormal heating and strong impact
Automatically disconnect the circuit when earth fault/ leakage current occurs and
exceeds the rated sensitivity.
Independent of power supply and line voltage, and free from external interference,
voltage fluctuation.
Mode | electro-magnetic type, electronic type |
Residual current characteristics | A, AC |
Pole No. | 1P+N, 3P+N |
Rated making and breaking capacity | 630A |
Rated current(A) | 16, 25, 40, 63 |
Rated voltage | AC 230/400V |
Rated frequency | 50/60Hz |
Rated residual operating current I△n(A) | 0.03, 0.1, 0.3, 0.5 |
Rated residual non operating current I△no | 0.5I△n |
Rated conditional short-circuit current Inc | 10kA |
Rated conditional residual short-circuit Current I△c | 10kA |
Tripping duration | instantaneous tripping≤0.1s |
Residual tripping current range | 0.5I△n~I△n |
Terminal Connection Height | 19mm |
Electro-mechanical endurance | 4000 cycles |
Connection capacity | Rigid conductor 25mm 2 |
Connection terminal | Screw terminal |
Pillar terminal with clamp | |
Fastening torque | 2.0Nm |
Installation | On symmetrical DIN rail 35.5mm, Panel mounting |
Protection class | IP20 |